ETERNITY GE12S

Scalable Gateway with Universal Network Connectivity

eternity GE12S gateway

Matrix ETERNITY is a universal connectivity gateway offering connectivity to POTS, GSM/3G, ISDN BRI, T1/E1 PRI and IP networks on a single platform. Matrix ETERNITY links an organization’s existing infrastructure to the new-age communication networks ensuring right connectivity and least cost for each and every call. The gateway is an ideal solution for workplaces such as call centers, ISP, ITSP, wholesale terminators and organizations experiencing high call traffic on a per-day basis.

  • Overview
  • Application
  • Key Features
  • Specifications
  • Resources

Overview

Matrix ETERNITY is a universal connectivity gateway offering connectivity to POTS, GSM/3G, ISDN BRI, T1/E1 PRI and IP networks on a single platform. Matrix ETERNITY links an organization’s existing infrastructure to the new-age communication networks ensuring right connectivity and least cost for each and every call. The gateway is an ideal solution for workplaces such as call centers, ISP, ITSP, wholesale terminators and organizations experiencing high call traffic on a per-day basis.

Universal routing combined with least cost routing, telephony costs can be significantly reduced by selecting the most economical network for call routing based on number, time, network, port and combinations of each. The universal slot architecture allows select and configure interface options to match the exact call traffic requirements of an organization.

Application

universal gateway application    Make VoIP Calls over the Broadband Network
  • IP, GSM/3G, ISDN and POTS - Universal network   connectivity in a single platform
  • Seamless integration into existing telephony infrastructure
  • Any-to-Any network call routing
  • 100% non-blocking architecture
  • Efficient least cost routing
  • Industry standard network protocols and signaling support
  •  
     

    Key Features

  • Completely flexible solution with universal design architecture
  • Any-to-Any network call routing
  • Time, Number, Service provider based least cost routing
  • Call Budgeting based on allocated amount, minutes and call count
  • Open-standard SIP support
  • Quad-Band GSM and Tri-Band 3G network operation
  • Network and BTS locking
  • Distributed processing architecture, localizing fault points and minimizing downtime
  • Flexible mounting options – Wall, Table Top and 19” Rack
  • Specifications

     

    System Capacity:

    • Expansion Slots
    12
    Expansion Cards 16/32 VoIP Channels per Interface Card
    4 GSM/3G SIM per Interface Card
    23/30 Digital (T1/E1 PRI) Channels per Interface Card
    8 BRI Channels per Interface Card
    2/4/8/16 FXO Ports per Interface Card
    8/16/20 FXS Ports per Interface Card

    VoIP Port:

    Protocol SIP v2
    Physical Connector Ethernet (RJ45)
    Voice Quality G.168 Echo Cancellation, Layer3 QoS and DiffServ, CNG
    Voice Codecs G.711 (A-law, µ-Law), G.723, G.729AB, GSM-FR, GSM-EFR and iLBC Voice Codec
    SIP Trunks 16

    Mobile Port:

    Frequency Bands Quad-Band GSM850, EGSM900, DCS1800, PCS1900
    Tri-Band WCDMA 850/1900/2100 MHz or Tri-Band WCDMA 900/1900/2100 MHz
    Compliance ETSI GSM Phase2/2+
    SIM Interface 1.8, 3V SIM Interface
    Antenna Panel Mount or Extended Cable Antenna 
    1.8/3.0 dBi, 50 Ω SMA (Male) Connector 

    T1/E1/PRI:

    Channels 2B+D
    Physical Connector RJ48 (120Ω)
    Personality Network (NT) and Terminal (TE)
    Switch Variants AT&T 4ESS, AT&T 5ESS, DMS-100, ETSI NET5, ITU-T Q.921, ITU-T Q.931, NTT INS64, US NI2 (National ISDN 2), QSIG ECMA, France VN Signaling
    Framing ESF for T1 and CEPT1 (with/without CRC) for E1

    ISDN BRI Port:

    Physical Connector RJ45
    Operational Mode Software Configurable NT/TE modes
    Interface S/T Interface, Point to Point and Point to Multipoint
    Switch Variant AT&T 4ESS, DMS-100, ETSI NET3, ITU-T Q.921, ITU-T Q.931, NTT INS64, US NI1 (National ISDN 1), France VNx Signaling

    FXO Port:

    Physical Connector RJ11
    Dialing DTMF and Pulse  (10/20PPS)
    Loop Limit 1200W
    CLI Presentation DTMF, FSK ITU-T V.23 and FSK Bellcore 202A CLI

    FXS Port:

    Physical Connector RJ11
    Dialing DTMF and Pulse  (10/20PPS)
    CLI Presentation DTMF, FSK ITU-T V.23 and FSK Bellcore 202A CLI
    Call Maturity Polarity Reversal

    Power Supply:

    Input  Option 1 (Mains): 100-240 VAC, 47-63 Hz
    Option 2 (DC): 48VDC +/- 20%
    Power Consumption  50W (Typical)

    Mechanical:

    Dimensions (WxHxD) 41.2 x 16.0 x 25.4 cms (16.22" x 6.29" x 10.0")
    Unit Weight 6.5kg (14.3lbs)
    Shipping Weight 9.5kg (20.9lbs)
    Mounting Options Wall Mount, Table Top and 19" Rack Mount

    Environmental:

    Operating Temperature  -10° C to +50° C (14° F to +122° F)
    Storage Temperature  -40° C to +85° C (-40° F to +185° F)
    Operating Humidity  5-95% RH (Non-Condensing)
    Storage Humidity  0-95% RH (Non-Condensing) at 40° C

    Regulatory Compliances:

    IEC 60950-1, IEC 6000 68-2-6:2007, IEC 68-2-27, IS:9000, TEC, RoHS, FCC Part15, FCC68,CE

    Resources

       Brochure    Presentations  
  • ETERNITY Universal Gateway
  • ETERNITY Universal Gateway
  •  
  • ETERNITY Technical Specifications
  •    
         
       E-mailers    Certificates  
  • Universal Network Connectivity: The Single Shot
  • ETERNITY CE
  •  
  • Boundless Communication: Any-to-Any Network
  • ETERNITY RoHS
  •  
         
       Whitepaper    
  • VoIP-GSM/3G Gateway for Enterprises
  •